示例圖來源：LichAmnesia/awesome-ad-video-prompts · CC BY 4.0
心得與說明
時長與鏡頭：6 秒三段：實物建立 → 變透明露結構 → 環繞 + 恢復。重點在第二段，所以第一、三段可以壓縮。模型並不知道你產品的真實內部構造，內部結構越複雜越容易"編造"，最穩的做法是用首尾幀：首幀是產品實拍圖，尾幀是用圖像模型或設計稿做的"剖面示意圖"，讓模型補中間的透明化過程。
怎麼填變量：[可重複使用的冷萃杯] 換成"濾水壺""保溫杯"；[不鏽鋼濾網] 換成"活性炭濾芯""雙層真空夾層"。剖面線條只要求"白色細線"，不要讓模型寫參數文字，參數和賣點在後期做成標註貼片。
常見失敗與調整：
- 剖面線條亂跳：寫"線條一次畫好後保持靜止，只有液體在動"。
- 環繞時杯子變形：刪掉環繞，改成固定機位。
- 冰塊掉進去後水溢出來：寫"液麵只盪開一圈漣漪"。
改編自 LichAmnesia/awesome-ad-video-prompts（awesome-ad-video-prompts contributors），許可證 CC BY 4.0。
英文原版
Cinematic 'how-it-works' explainer for a [brand] reusable cold-brew bottle. 0-2s: top-down macro on dark coffee swirling inside frosted glass, low window light raking across beaded condensation, the camera locked and still, faint kitchen-morning hush. 2-4s: a slow 8cm push-in as the front glass wall turns half-transparent and a clean white cross-section overlay draws on, exposing the inner steel mesh filter holding the grounds back while liquid passes through — crisp vector lines, zero jitter, the overlay tracking the bottle exactly. 4-6s: the camera arcs 30 degrees right around the bottle while it stays pin-sharp in frame; a single ice cube drops with a tight clink and one clean ripple crosses the surface, then the overlay fades and the glass re-solidifies. The bottle holds identical silhouette, frosted finish, cap threading, and label position across every beat — no warping, stretching, label drift, double edges, or melting glass. Warm matte grade, shallow depth of field, tactile glass-and-brushed-steel texture.同款作品
用這條提示詞做出來的作品；原作者會因此獲得積分
還沒有同款，來做第一個。
0 條評論
還沒有評論，來搶沙發～