示例圖來源：LichAmnesia/awesome-ad-video-prompts · CC BY 4.0
心得與說明
時長與鏡頭：四段是"亮相 → 透視 → 演示 → 回到品牌"。可選時長偏短時，刪掉 5–8 秒那段，在 3–5 秒回彈結束時收住；偏長時，在回彈之後加一次"再掃一遍，換個角度看前掌"。
怎麼用：首幀用一張深色背景、側面 45 度的清晰產品圖，模型只需要"加掃描線、加透視、加運鏡"。沒有產品圖時刪掉第一句，當作文生影片使用。原文寫"腳跟着地"但畫面裏沒有人，可靈常會憑空長出一隻腳，建議改成"鞋子從十幾釐米高處落下，鞋跟着地"。
怎麼填變量：[青色] 建議換成品牌主色；內部結構按實際產品改，例如"氣墊裏的氣柱""床墊裏的獨立彈簧""頭盔裏的緩衝層"。
常見失敗與調整：
- 整隻鞋都變透明：寫成"只有鞋面像玻璃一樣透明，鞋底和中底保持原樣"。
- 透視層閃爍：刪掉"恢復不透明"那段，讓透視狀態保持到結尾。
改編自 LichAmnesia/awesome-ad-video-prompts（awesome-ad-video-prompts contributors），許可證 CC BY 4.0。
英文原版
High-energy x-ray feature spotlight for a [brand] running sneaker's responsive midsole. 0-2s: low hero angle, the shoe planted on wet black asphalt, a single cyan rim light tracing its silhouette, reflections pooling beneath, a deep bass pulse underneath. 2-3s: a thin horizontal scan line sweeps left to right and only the upper goes translucent — the midsole stays solid and now reveals stacked foam cells inside, lit from within. 3-5s: a hard heel-strike in slow motion, the foam cells visibly compress then spring back, a soft glow ripple radiating outward from the impact point as the dolly pushes in tight on the heel. 5-8s: the upper re-solidifies opaque and the camera tilts up the laces into a clean rack focus that snaps to the side logo. The sneaker keeps identical geometry, stitching density, midsole stack height, and two-tone colorway throughout — no morphing, melting, smearing, extra eyelets, or flicker between transparent and solid states. High-contrast cyan-on-charcoal grade, sharp mesh-and-rubber texture.同款作品
用這條提示詞做出來的作品；原作者會因此獲得積分
還沒有同款，來做第一個。
0 條評論
還沒有評論，來搶沙發～